No Guts No Glory - Another Halloween Decoration DIY

While working on several Halloween decorations this week, two of my 'failed' attempts yielded some great techniques that I thought were worth sharing.  To quote Deepak Shopra, "There are no accidents... there is only some purpose that we haven't yet understood".

So, while I was trying to make a full moon, I discovered how to make

DIY Organs and Intestines for your 

Zombie Halloween Party!

This project is two-fold.  First you'll see how to make a 'disc of intestines' and I'll also show you how to create internal organs using a similar process.

Materials:
Balloons:  Red, Blue, or White, but anything you have around will work.
String:  Ribbon can also be used, but rough string or twine gives that 'hasty home surgery' look.
Scissors:  Junky ones.  Great opportunity to use "throw away" dollar store scissors, cause you might have to pitch them. 
Spray Paint:  Red, Blue, Black, Silver, Gray, or any combo of those.   Glossy Preferred.
Spritz Bottle:  Filled with water. 
Expanding Foam Insulation:  Use leftovers after an Autumn Weather proofing project, or buy a can.
Round Mold:  I used a section of cardboard tube originally intended for concrete footings. (You can find it near the concrete in a Home Improvement store. $9)  We already had the tube at home for a costume, so I cut off a hunk, but really anything would work.  See notes below. 



Step 1:  Gather Materials
The spray foam grows like The Blob, and sticks to anything in sight, so be prepped.  Cut several lengths of string to tie off the balloons, set the mold of your choosing out on some scrap paper,  and wear gloves.   Be sure to follow all safety instructions on the foam, but most importantly, USE GLOVES - this stuff will NOT wash off your hands for several days.  You can use acetone to clean up sticky scissors, but after it's dry, it's a lost cause.

Step 2. Intestine Mold
As I mentioned I used a short length of LARGE cardboard tube from the concrete isle in the hardware store.  The inside is waxy, so after the foam dried I was able to remove it from the form.  If your form is NOT waxy be sure to line it with a layer of paper or cling wrap, etc.  If you are boldly using a spring form pan for this task - line it a zillion times!   You can create your own amorphous shape from cardboard for a more imperfect organic look. (Still needs to be lined so it's not stuck to the form forever.) Set your form on a sheet of scrap paper (newspaper) and begin to fill the mold using the straw provided with the foam.  As you fill the form, think like an intestine.  Circular thin lines of foam give a great look.  Remember, this Blob will 'grow' as it's exposed to air, start with thin lines.  When you lines have grown to your desired thickness you can mist the foam with a bit of water to stop it's "growth".  (Image below.)


Step 3:  Organ Forms
The basic goal is to fill a balloon with foam, like you would fill a water balloon.  Fill the balloon using the straw provided with the spray foam to about 2/3 to 3/4 of the ultimate desired organ size.  Remember, variety in size and shape helps things to look natural.  Slide the balloon on the straw and loosely tie a basic overhand knot around the mouth of the balloon.  (Hint: That's just the very first part of tying your shoes, before you make the bunny ears. :)  Having the knot in place before you press the trigger really helps for an easy tie-off once the Blob starts growing.  Fill the balloon with foam ALLOWING THE GAS TO ESCAPE as much as possible, but containing the foam.   Slide the balloon off the straw and tie it off - TIGHT!

Step 4:  Allow to Dry
Keep an eye on this stuff - seriously.  You think it's done growing and leave it alone and you come back and it has doubled in size.  Once it's grown to the size/shape you like, spritz with water to slow growth.  The foam in the balloons will dry MUCH more slowly then that in the open form.  I assume that's a lack of oxygen situation.  After about 2-3 hours you will feel that it has started to firm up, but had not set hard.  When that happens, WHILE THE BALLOONS ARE STILL PLIABLE proceed to the next step.

Step Five:  Cut the Organs
Using CHEAP scissors, cut a slit in each 'organ' and allow some of the foam to ooze out.  (It's SO HALLOWEEN-Y to do!)  If you want more ooze, cut a larger slit, if you want to slow the growth, spritz with water.  I found that slits about 1" long allowed enough flow to get nice "lumps" but not SO much ooze that the balloon emptied or the lumps left the balloon all together.  Getting nice lumpy orbs is very much a surface tension thing.  Lots of factors (temp, dry time, humidity, etc) probably play a roll in this, so play it by ear.

Step 6:  Paint

Layering paint is the trick here.  Lots of DEEP red tones (think Cranberry not Barn red) and mix in some darker tones.  I used deep blue, but black or mahogany would work well too.  For the intestines I started with a layer of silver (I was TRYING to make a moon - FAIL!) and that added some interesting depth.   I layered the colors while the paint was still wet which allowed for nice blend and bleed among the layers of color.  You can play with it.  The best part is that pesky spray paint drip marks DON'T MATTER!  They just look like dripping blood or veins, etc.   Gloss gives them a nice wet look, achievable with glossy paint, or a high gloss modge-podge finish over the paint.

 






Step 7: Display
In the photos below I layered my organs in a shallow dish with blue glass vase filler (dollar store) so they looked like they were sitting on ice.  I've about hit my gore limit with the organ's themselves, but you gory Halloween types could use fake blood in your display to amp up the yuck factor.  I happen to  have a Mad Scientist's laboratory display so I'll slip a few in apothecary jars as well.

For the intestines, I think setting them on a cake stand with a slice cut out at a zombie party would be SUPER yucky cool, but be sure you guests don't eat your fabulous new props!

ENJOY! 

PS:  Failures:  The intestines were a failed moon attempt.  I was hoping the foam would create a big mushroom over the form.  It was a VERY damp rainy day when I did this, so the growth was a bit inhibited I think - Could work in the future.  The intestines were actually failed attempts at cheap ghost heads (that would save me a trip to the craft store) - I didn't think through that the foam doesn't GROW when not exposed to air (ie: in a balloon) so my anticipated big round foam heads turned out to be limp balloons.  After a couple of hours I got tired of waiting so I cut into one to see what the holdup was and VOILA.  :)  

Speaking of Spiders.. My Spider Inspired DIY Halloween Display

If you've read my last few posts you will have learned that in our one room school house spiders present a constant battle, particularly as the weather turns cool, and especially as we reclaimed the house from the mountain of overgrown weeds and ivy outside.

While I HATE being startled by spiders outside, and the thought of spiders inside gives me goosebumps, I must have been inspired by the little beasts, because spiders have played a major role in my Halloween decorations this year.   Below I'll show YOU how to create a fabulous spider display centered around a VERY spooky cocooned figure.

These spiders have just claimed a human victim, and have wrapped him up for a Halloween Feast!

Recreate this scene in your home by following these simple steps: 

1: Gather Materials:  
- Human Figure:  I used a dress form.  You could also use a few pillows or a roll of foam bound to create the look of a narrow waist, etc.

- Tulle Netting:  I had a roll of white tulle left over from some wedding decor.  This is an inexpensive purchase at the fabric shop, or you could use old drapery sheers, thin white fabric, cotton muslin, etc.
- Batting:  Use left over pillow fill,  batting scraps, or synthetic 'snow' from your holiday display.  Anything fluffy and white will work.
- Synthetic Spider Web:  Be sure to get the kind that can be spread into a full 'sheet' of web.  If you've purchased a bag that ends up being all short cuts of web, you can use that in place of the batting.
- Fishing Line
-Spiders:  Large spiders add drama and make the actual takedown of a human more believable, but a swarm of small spiders crawling on the body looks great too.

2. Prep the Body:  If your dressform is a bright color you may want to cover it in a neutral fabric to allow for a white spider sack.  Another approach would be dressing the form in tattered clothing.  I might try this look next year.  IF you plan to use this piece outside, think in terms of styrofoam or another rain resistant material. 

3.  Cut Your Netting:  Add the height of your torso and the distance you would like the body to hang to determine the overall length of the web sack.  Double this distance to determine the amount of tulle you will need.  Lay your length of fabric across your work surface and center your body within the length.  Please note:  I chose to hang my headless body upside down in the sack, so in my case the shoulders of my form align with the center of my piece of fabric.  You can face your 'dummy' in whichever direction the unlucky fellow wants to hang.  I've used tulle here because I like the look of lots of layers of sheer fabric in the finished piece.  The sheer tulle allows the figure's silhouette to show clearly when back-lit.  If you have a somewhat lumpy dummy, conceal the shape by using an opaque fabric at this step. 

4.  Add Batting:  You'll see that I used a combination of some fake snow from a holiday display AND the 'short cut' web material I mentioned in the materials list.  This was a dollar store purchase and I thought it was a waste, but I've finally found a use for it.   I like to add lots of batting at the bottom of the sack.  This helps create the classic teardrop shape in your finished piece. 

5.  Wrap Him Up:  After you've layered fluff onto the dummy, fold the second half of the sheer fabric up over the figure.  The two raw ends of the fabric will align at the top of the sack, and the fold will be at the very bottom of the sack.

6.  Twist:  A single width of fabric should be suffiicent to wrap around the side of the body.  To add bulk to the most visable side of the sack, I wrapped the side of the body and tiwsted the excess toward the front of the figure.  Work in terms of twisting as opposed to folding - it allows for a more organic shape in the end.  Once your body is covered gather the raw ends of the tulle into a bundle, securing it with a scrap of extra fabric.  Your body will hang from the tie you create at the end, so be sure this point is secure. 

7.  Add the Web:  It wouldn't be a spider's victim without the webbing!   Open your package of webbing and unroll the sheet to it's full length.  It will be a bit like a long sausage at this point.  Working on a large flat surface spearing the 'rope' into a wispy web look.   Remember this is a spider web and not a winter wonderland - stretch fluffy areas into sheer whispy strands.

8.  Seal His Fate:  Wrap the cocoon in the same way you wrapped the body in tulle.  Cover the front and back of the figure with the web sheet you've created, stretching web around the sides of the body to create one complete 'sack'.   Remember to leave extra web fabric to run up to the point from which the sack will hang.  The web will not support any of the weight of the figure, but it needs to look like it's the element that's binding the body in place.

9.  Hang Him Up:   Choose a ceiling corner or point in a tree to hang your body from and hang him high!  Remember to support the figure with your durable fabric layer NOT from the web material - that just wont work.

10.  Embellish with Spiders:   Whether your unsuspecting victim was trapped by one large spider or an army of tiny villains, be sure to hang spiders in the area to guard their prey!   Your guests will gasp and groan at the spooky addition to your Halloween decor.


NOTES:  Lighting:  Consider back-lighting the piece to highlight the silhouette inside, or use black light for an eerie glow.  

VOILA:   Add a few large spiders, lots of spooky webbing, and a few webs and you have a statement making decoration for just a few bucks!  :)  

 

DIY All Natural Pantry Pest Repellant:

It's the time of year when all of the creepy crawly pests that are startling when spotted outside take it upon them selves to sneak inside where they can be downright terrifying.   Living in a 150 year old building on a wooded lot that stood largely unmaintained in recent years has presented us with LOTS of pests.  (click HERE for more information!.)

I've been fighting these pests with natural remedies to the best of my abilities, and have come up with some unique twists to good ol' "home remedies" that I'd like to share with you.  

When we moved into this house we were relegated to a VERY primitive kitchen set up in a damp basement.  As you might expect, this meant that keeping bugs away was a constant battle.  Shortly after we moved in I noted a HUGE weevil gathering taking place in the dog treat jar. - It was WAR! 

After a google frenzy I found that most people recommend throwing EVERYTHING away, bleaching everything in site, not keeping any dried foods stocked in the pantry for any length of time, and more harsh chemicals. None of those seemed like viable options, (Seriously, scrubbing my cabinets weekly is a rediculous suggestion!) so after some research I developed my own all natural pantry pest repellant (which has the added effect of keeping other creepy crawlies out of the area as well).

An Herb Sachet that smells great, and wont scream "We have a pest problem!" to even the most finicky of guests. 

 (And let's face it, the kind of person who would be offended when they found your bug repellant is the EXACT same person who would poke around in your pantry.)

 

This was a VERY easy project that involved items I already owned, herbs already in my pantry, and a quick trip to the bulk spice isle in Whole Foods.  

Instructions:  Assemble your ingredients and stuff them in your sachets.  Complex, right?  I know, I know.... but I do have some notes that I think are of value.  First, use the bulk isle at your grocery store.  If you are making 5 sachets, you only need 10 pieces of Star Anise - don't pay for a whole container.  Secondly, a note about ingredients.  I compiled this list based on various ingredients noted as being helpful when dissuading pests. The coriander was never specifically mentioned in anything I read, but it seemed like a similar scent that would have similar properties.  I've never tried the sachets without this ingredient, so I can't guarantee that they are part of the magic, but I do like the way they smell in the pantry if nothing else. Finally,  if you pull the bay leaves from the sachets, the remaining ingredients make GREAT mulled cider.  Since pest season and cider season are one in the same - I find this tidbit particularly charming.  :) 

Ingredients:

1.  Sachet:   I used some little pink sachets left over from a baby shower project.  Anything that would allow scent to penetrate would work:  nylons, thin cotton, tea bags, etc.  

2.  Peppercorn:  (8 to 10.)  This is a good way to use up the ones that inevitably escape as you fill a    grinder and roll all over the kitchen floor.  Gather them up and refresh your sachets next time.  

3.  Clove:  (A  Pinch).  Let's say 3-5 pieces.   

4.  Star Anise:  (2) I think spiders don't like these because some sort of uncanny valley phenomenon. 

5.  Cinnamon Sticks: (2 ) Ground would work I suppose, 

but the powder would escape your sachet. 

6.  Bay Leaves:  (2 or 3) I received a bay wreath last autumn, so I had LOTS of leaves laying around.  The more the merrier but 2-3 seems to be sufficient. 

7.  Coriander:  2 Pods.  

YOU'RE DONE:   Place these little wonders throughout your pantry cabinets and anywhere else where you'd like to keep the beasts at bay.  I've tucked them into my bathroom cabinet, in my coat closet, dresser drawers, etc.  The scent is delightful, and they are effective for 6 months at a minimum.  Enjoy!